Quantification of the composition of pyrolysis oils of complex plastic waste by gas chromatography coupled with mass spectrometer detector.

Waste valorisation through pyrolysis generates solid, liquid and gaseous fractions that need to be deeply characterised in order to try to recover secondary raw materials or chemicals. Depending on the waste and the process conditions, the liquid fraction obtained (so-called pyrolysis oil) can be very complex. This work proposes a method to quantitatively measure the composition of pyrolysis oils coming from three types of polymeric waste: (1) plastic packaging from sorting plants of municipal solid waste, (2) plastic rich fractions rejected from sorting plants of waste of electrical and electronic equipment and (3) end-of-life carbon/glass fibre reinforced thermoset polymers. The proposed methodology uses a gas chromatography (GC) coupled with mass spectrometer detector (MS) analytical technique, a certified saturated alkanes' mix, an internal standard and fourteen model compounds. Validation of the methodology concluded that the average relative error was between -59 wt% and +62 wt% (with standard deviations between 0 wt% and 13 wt%). Considering that the state-of-the-art scenario to quantify complex plastic pyrolysis oils as a whole is almost none and that they are usually evaluated only qualitatively based on the area percentage of the GC-MS chromatograms, the presented quantification methodology implies a clear step forward towards complex pyrolysis oil compositional quantification in a cost-effective way. Besides, this quantification methodology enables determining what proportion is being detected by GC-MS with respect to the total oil. Finally, the presented work includes all the Kováts RI for complex temperature-program gas chromatography of all the signals identified in the analysed pyrolysis oils, to be readily available to other researchers towards the identification of chemical compounds in their studies.

Entropy is a good approximation to the electronic (static) correlation energy.

For an electronic system, given a mean field method and a distribution of orbital occupation numbers that are close to the natural occupations of the correlated system, we provide formal evidence and computational support to the hypothesis that the entropy (or more precisely -σS, where σ is a parameter and S is the entropy) of such a distribution is a good approximation to the correlation energy. Underpinning the formal evidence are mild assumptions: the correlation energy is strictly a functional of the occupation numbers, and the occupation numbers derive from an invertible distribution. Computational support centers around employing different mean field methods and occupation number distributions (Fermi-Dirac, Gaussian, and linear), for which our claims are verified for a series of pilot calculations involving bond breaking and chemical reactions. This work establishes a formal footing for those methods employing entropy as a measure of electronic correlation energy (e.g., i-DMFT [Wang and Baerends, Phys. Rev. Lett. 128, 013001 (2022)] and TAO-DFT [J.-D. Chai, J. Chem. Phys. 136, 154104 (2012)]) and sets the stage for the widespread use of entropy functionals for approximating the (static) electronic correlation.

Transferencia de habilidades prácticas desde el laboratorio a cirugía in vivo utilizando el sistema robótico Avatera: Estudio experimental / Transfer of acquired practical skills from dry lab into live surgery using the Avatera robotic system: an experimental study

Objetivo Evaluar la transferencia de habilidades adquiridas en el laboratorio a un entorno experimental real para realizar cirugía robótica. Material y métodos Se utilizó un modelo experimental in vivo. Seis residentes y fellows de urología; dos R2 sin exposición previa a cirugía laparoscópica (Grupo 1), dos R4 con exposición intermedia (Grupo 2) y dos fellows formados en cirugía laparoscópica (Grupo 3) realizaron reimplantes ureterales distales, pieloplastia, y nefrectomía radical en tres cerdos hembra. Previamente a realizar los procedimientos, cada participante completó entre 10 y 14 h de formación en cirugía robótica en laboratorio hasta adquirir habilidades para realizar maniobras quirúrgicas básicas (sutura, corte y paso de agujas). Las variables analizadas fueron completar o no con éxito los procedimientos, el tiempo de consola y el tiempo para realizar las maniobras solicitadas y. presencia de complicaciones. Resultados Los tres grupos completaron con éxito todos los procedimientos excepto la pieloplastia, que no la completó el Grupo 1 por sangrado de la vena renal. El Grupo 3 logró un tiempo de consola más corto para todos los procedimientos y para los pasos quirúrgicos por separado, seguido por el Grupo 2. El grupo más lento para completar los procedimientos y los pasos fue el Grupo 1. Conclusiones A pesar de que es necesaria evidencia clínica al respecto, nuestros resultados sugieren que los procedimientos urológicos con asistencia robótica y los pasos más difíciles técnicamente podrían realizarse de manera segura y efectiva después de un entrenamiento adecuado en el laboratorio bajo la supervisión de un mentor. (AU)

Objective To evaluate the transfer of the practical skills of robot-assisted surgery acquired in the dry-lab into a real live experimental setting for performing upper and lower urinary tract surgeries. Material and methods An in vivo experimental study design was utilized. Six urology trainees and fellows; two 2nd year trainees with no previous exposure to laparoscopic surgery (Group 1), two 4th year residents with medium exposure to laparoscopic surgery (Group 2) and two fellows trained to perform laparoscopic surgeries (Group 3) performed ureteral reimplantation into the bladder, pyeloplasty, and radical nephrectomy on three female pigs under general anesthesia. Prior to performing the requested procedures, each participant completed 10-14 hours dry-lab robotic training acquiring skills in basic surgical tasks, such as suturing, cutting and needle passage. The recorded variables were the successful completion of the procedures, the console time, and the time to perform different steps and major complications. Results All procedures were completed successfully by all groups except the pyeloplasty by Group 1 which was complicated by bleeding from the renal vein, and the procedure was abandoned. Group 3 achieved shorter console time for all successfully completed procedures and for separate surgical steps compared to all groups, followed by Group 2. The slowest group for all procedures and steps analyzed was Group 3. Conclusions Although further clinical evidence is needed, the robotic-assisted urological procedures and the most challenging steps could be performed safely and effectively after proper training in the dry lab under mentor supervision according to our study. (AU)

Comparing RNA extraction methods to face the variations in RNA quality using two human biological matrices.

BACKGROUND: Nucleic acids, RNA among them, are widely used in biomedicine and Biotechnology. Because of their susceptibility to degradation by RNases, the handling and extraction process of RNA from cells and tissues require specialized personnel and standardized methods to guarantee high purity and integrity. Due to the diversity of techniques found in the market, a comparative study between different RNA extraction methods is useful to facilitate the best choice for the researcher or in research service platforms such as biobanks to see the traceability of the samples. METHODS AND RESULTS: In this study, we have compared seven different RNA extraction methods: manual (TRIzol™), semiautomated (QIAGEN™, Bio-Rad, Monarch®, and Canvax™), and fully automated (QIAcube™ and Maxwell®) processes, from two biological matrices: human Jurkat T cells and peripheral blood mononuclear cells (PBMC). Results showed marked differences in the RNA quality and functionality according to the method employed for RNA extraction and the matrix used. DISCUSSION: QIAcube™ and semi-automated extraction methods were perceived as the best options because of their lower variability, good functionality, and lower cost (P < 0.001). These data contribute to facilitating researchers or research service platforms (Biobanks) in decision-making practices and emphasize the relevance of the selection of the RNA extraction method in each experimental procedure or traceability study to guarantee both quality standards and its reproducibility.

Transfer of acquired practical skills from dry lab into live surgery using the avatera robotic system: An experimental study.

OBJECTIVE: To evaluate the transfer of the practical skills of robot-assisted surgery acquired in the dry-lab into a real live experimental setting for performing upper and lower urinary tract surgeries. MATERIAL AND METHODS: An in vivo experimental study design was utilized. Six urology trainees and fellows; two 2nd year trainees with no previous exposure to laparoscopic surgery (Group 1), two 4th year residents with medium exposure to laparoscopic surgery (Group 2) and two fellows trained to perform laparoscopic surgeries (Group 3) performed ureteral reimplantation into the bladder, pyeloplasty, and radical nephrectomy on three female pigs under general anesthesia. Prior to performing the requested procedures, each participant completed 10-14 h dry-lab robotic training acquiring skills in basic surgical tasks, such as suturing, cutting and needle passage. The recorded variables were the successful completion of the procedures, the console time, and the time to perform different steps and major complications. RESULTS: All procedures were completed successfully by all groups except the pyeloplasty by group 1 which was complicated by bleeding from the renal vein, and the procedure was abandoned. Group 3 achieved shorter console time for all successfully completed procedures and for separate surgical steps compared to all groups, followed by Group 2. The slowest group for all procedures and steps analyzed was Group 3. CONCLUSIONS: Although further clinical evidence is needed, the robotic-assisted urological procedures and the most challenging steps could be performed safely and effectively after proper training in the dry lab under mentor supervision according to our study.

Near infrared sensors for the precise characterization of salt content in canned tuna fish.

Non-invasive technologies could help to guarantee quality standards of canned tuna fish. The aim of this study was to investigate the ability of bench-top (FT-NIR) and low-cost (LC-NIR) near infrared spectrometers to determine salt content and texture in canned tuna. Salt content distribution was also investigated using hyperspectral imaging (HSI) and computed tomography. Spectra were acquired on canned tuna and reference analysis performed. Partial least squares regression and discriminant analysis were used to develop salt content predictive and texture classification models. Salt content predictive errors were 0.10%, 0.22% and 0.22% for FT-NIR, LC-NIR and HSI, respectively. Salt content was not always homogeneously distributed in the can which was attributed to the salt content differences between internal and external parts of the tuna fish. Low-cost sensors could be a suitable solution to standardise the production and enable precise nutritional labelling, but more sophisticated algorithms are needed to identify textural defects.

Which Physical Phenomena Determine the Ionization Potential of Liquid Water?

Understanding and predicting the properties of molecular liquids from the corresponding properties of the individual molecules is notoriously difficult because there is cooperative behavior among the molecules in the liquid. This is particularly relevant for water, where even the most fundamental molecular properties, such as the dipole moment, are radically different in the liquid compared to the gas phase. In this work, we focus on the ionization potential (IP) of liquid water by dissecting its individual contributions from the individual molecules making up the liquid. This is achieved by using periodic subsystem DFT, a state-of-the-art electronic structure method based on density embedding. We identify and evaluate four important electronic contributions to the IP of water: (1) mean-field, evaluated at the Hartree-Fock level; (2) electronic correlation, incorporated via DFT and wave function-based methods; (3) interaction with and (4) polarization of the environment, both evaluated ab initio with density embedding. Furthermore, we analyze their impact on the IP relative to the structural fluctuation of liquid water, revealing unexpected, hidden correlations, confirming that the broadening of the photoelectron spectra is mostly caused by intermolecular interactions confined in the first solvation shell.

COVID-19 en trabajadores activos durante la cuarentena. Realidad de un sector urbano de Caracas, Venezuela / COVID-19 in active workers during quarantine. Reality of an urban sector of Caracas, Venezuela

La pandemia por COVID-19 resultó un problema para la salud pública mundial, que impactó particularmente al sector de trabajadores que debían trabajar y estar expuestos durante el periodo de cuarentena. Objetivo, analizar la incidencia de COVID-19 y sus características en trabajadores(as) activos(as) durante 34 semanas. Investigación descriptiva y transversal. Población constituida por todos los trabajadores(as) activos de sectores priorizados, con diagnóstico confirmado de COVID-19. De los 1.186 casos confirmados, 658 casos (55%) correspondió a trabajadores activos, una incidencia de 1,7 casos x 1000 (mayor a la esperada), con predominio en trabajadores(as) del sector salud (267casos), choferes del transporte y trabajadores de funerarias (253 casos). El 68,7% menor de 40 años y predominio del sexo masculino (61,2%). En el personal de salud, el 30% correspondió a personal de enfermería y 22% en médicos. La tasa de mortalidad en la población de trabajadores activos fue de 0,07 x cada 1000, con un índice de mortalidad de 0,05 y un índice de recuperación del 95,5%, comportamiento similar al de la población general. Sin embargo, la tasa de letalidad (trabajadores activos positivos fallecidos) fue del 4,4% (29 casos), donde el 75% (22/29) fueron enfermeras y médicos, lo que confirmó al sector salud y trabajadores(as) de servicios, como población trabajadora altamente expuesta y vulnerable, lo que justificó priorizar las medidas de prevención en estos trabajadores, al iniciar el sistema de vigilancia epidemiológica, la vacunación y la dotación con uso adecuado de la protección personal(AU)

The COVID-19 Pandemic was a problem for global public health, which particularly impacted the sector of workers who had to work and were exposed during the quarantine period. The objective was to analyze the incidence of COVID- 19 and its characteristics in active workers during 34 weeks. Descriptive and cross-sectional research. Population made up of all active workers in prioritized sectors, with a confirmed diagnosis of COVID-19. Of the 1,186 confirmed cases, 658 cases (55%) corresponded to active workers, an incidence of 1.7 cases per 1,000 (higher than expected), with a predominance of workers in the health sector (267 cases), transport drivers and funeral home workers (253 cases). 68.7% under 40 years of age and predominance of the male sex (61.2%). In health personnel, 30% corresponded to nursing personnel and 22% to doctors. The mortality rate in the population of active workers was 0.07 x every 1000, with a mortality rate of 0.05 and a recovery rate of 95.5%, behavior similar to that of the general population. However, the fatality rate (deceased positive active workers) was 4.4% (29 cases), where 75% (22/29) were nurses and doctors, which confirmed the health sector and service workers, as a highly exposed and vulnerable working population, which justified prioritizing prevention measures in these workers, by initiating the epidemiological surveillance system, vaccination and provision with adequate use of personal protection(AU)

Research-based flow cytometry assays for pathogenic assessment in the human B-cell biology of gene variants revealed in the diagnosis of inborn errors of immunity: a Bruton's tyrosine kinase case-study.

Introduction: Inborn errors of immunity (IEI) are an expanding group of rare diseases whose field has been boosted by next-generation sequencing (NGS), revealing several new entities, accelerating routine diagnoses, expanding the number of atypical presentations and generating uncertainties regarding the pathogenic relevance of several novel variants. Methods: Research laboratories that diagnose and provide support for IEI require accurate, reproducible and sustainable phenotypic, cellular and molecular functional assays to explore the pathogenic consequences of human leukocyte gene variants and contribute to their assessment. We have implemented a set of advanced flow cytometry-based assays to better dissect human B-cell biology in a translational research laboratory. We illustrate the utility of these techniques for the in-depth characterization of a novel (c.1685G>A, p.R562Q) de novo gene variant predicted as probably pathogenic but with no previous insights into the protein and cellular effects, located in the tyrosine kinase domain of the Bruton's tyrosine kinase (BTK) gene, in an apparently healthy 14-year-old male patient referred to our clinic for an incidental finding of low immunoglobulin (Ig) M levels with no history of recurrent infections. Results and discussion: A phenotypic analysis of bone marrow (BM) revealed a slightly high percentage of pre-B-I subset in BM, with no blockage at this stage, as typically observed in classical X-linked agammaglobulinemia (XLA) patients. The phenotypic analysis in peripheral blood also revealed reduced absolute numbers of B cells, all pre-germinal center maturation stages, together with reduced but detectable numbers of different memory and plasma cell isotypes. The R562Q variant allows Btk expression and normal activation of anti-IgM-induced phosphorylation of Y551 but diminished autophosphorylation at Y223 after anti IgM and CXCL12 stimulation. Lastly, we explored the potential impact of the variant protein for downstream Btk signaling in B cells. Within the canonical nuclear factor kappa B (NF-κB) activation pathway, normal IκBα degradation occurs after CD40L stimulation in patient and control cells. In contrast, disturbed IκBα degradation and reduced calcium ion (Ca2+) influx occurs on anti-IgM stimulation in the patient's B cells, suggesting an enzymatic impairment of the mutated tyrosine kinase domain.

Measurement of yield and quality of DNA in human buffy coat is extraction method dependent.

During the last few years, an important element in the improvement of the molecular biology techniques has been the necessity for availability of high quality and functionality DNA. Several DNA extraction procedures with different results in both performance and quality, have been proposed. In this study our objective was to determine the most reliable extraction method that balances DNA quantity, and to assess the sample quantification of the fluorometric DNA quantification methods. For this, blood extracted by venopunction from 20 healthy volunteers was used to obtain DNA from buffy coat, and 4 commercial DNA extraction kits were assessed as well as two fluorometric DNA quantification methods with protocols of different complexity. Results suggest that manual methods achieve higher quality and larger yields of DNA. DNA purity obtained with the 4 extraction kits evaluated through the 260/280 and 260/230 ratio showed that the Qiacube kit fulfilled the criteria established in this work, followed very close by the Flexigene kit. On the other hand, the fluorometric DNA methods used in the samples quantification showed a higher variability when using QuantiFlour method, obtaining better results probably due to the simplicity of this protocol.

Single-Cell Protein Production as a Strategy to Reincorporate Food Waste and Agro By-Products Back into the Processing Chain.

Food waste is a serious problem with negative environmental and economic consequences. Unused food (either as waste or by-products and referred to as food residues in the present work) is a source of carbohydrates, lipids, proteins, vitamins, minerals and bioactive compounds that could be used in an alternate or secondary life cycle to avoid discarding it. The present work reviews the potential use of food residues for the bioengineering of single-cell protein (SCP), addressing aspects of production, nutrition and safety, as well as the main challenges and perspectives. SCP is obtained from various microorganisms, including fungi, bacteria, yeasts and algae, in pure or mixed form. SCP generally contains a higher percentage of protein (30-80%) compared to soy (38.6%), fish (17.8%), meat (21.2%) and whole milk (3.28%). SCP is a source of essential amino acids, including methionine, threonine and lysine. The use of food residues as substrates for the production of SCP would reduce production costs (35-75%); however, optimization and industrial scaling are some of the main challenges to its sustainable production. The use food waste and agro by-products from the food industry could be a promising alternative to obtain protein according to a circular production scheme.

Investigación-Acción Participativa sobre percepciones, preocupaciones y necesidades de los profesionales de salud en una central de emergencias de Argentina: Investigación-Acción Participativa en personal de salud / Participatory Action Research on perceptions, concerns and needs of healthcare professionals in an emergency department in Argentina

Objetivo: Explorar las percepciones, preocupaciones y necesidades del personal de salud en una Central de Emergencias de Adultos (CEA) de Argentina. Métodos: Investigación o acción participativa, coordinada y ejecutada por el propio personal de la CEA, que incluyó médicos/as, personal de enfermería y administrativo/as para participar activamente en la recolección de información y en el análisis. Se utilizaron metodologías mixtas: análisis documental de quejas y reclamaciones escritas por parte de los pacientes, 10 entrevistas individuales y 2 grupos focales reflexivos con 10 integrantes del personal de salud (de diferente cargo y antigüedad, y residentes en formación). Resultados: Los tópicos emergentes fueron factores laborales que inducen al error y atentan contra el encuentro clínico centrado en la persona: la sobrecarga y la falta de tiempo, la sobreutilización de recursos por medicina defensiva y la tecnología que reemplaza el contacto físico. El personal de salud manifestó episodios de agresiones de pacientes o sus familiares, cuando las largas esperas y las insuficiencias estructurales (como falta de camas, saturación de sala de espera, incomodidad) atentan contra la paciencia y la tolerancia. A partir de esta reflexión se generaron mejoras en diversas áreas de la CEA.Conclusiones: La identificación de las problemáticas realizadas por los propios actores de la CEA resultó un método pertinente para generar un proceso de cambio de gestión colectiva, promover la reflexión y concientizar, permitir identificar áreas de mejora, diseñar estrategias y propuestas concretas (AU)

Introduction: To explore perceptions, concerns and needs of healthcare professionals in an emergency department (ED) from Argentina.Methods: Participatory action research, coordinated and carried out by ED healthcare professionals, which included physicians, nurses and administrative staff who actively en-gaged in both data collection and analysis. Mixed methodologies were used: documentary analysis of complaints and written claims by patients, 10 individual interviews, and two reflective focus groups of 10 healthcare professionals (who differed in occupation, seniority and experience, including residents in training).Results: The topics that emerged were work factors that lead to errors and threaten pa-tient-centered clinical encounters: work overload and lack of time, the overuse of resources for defensive medicine purposes and technology that replaces physical contact. Healthcare professionals reported episodes of aggression by patients or their families, when long waits and structural insufficiencies (such as lack of beds, saturation of the waiting room, discom-fort) threaten patience and tolerance. From these insights, improvements were generated in various areas of the ED.Conclusions: The identification of problems by the ED stakeholders l was a relevant ap-proach that led to a process of collective management change, promoted reflection and raised awareness, allowing the identification of areas for improvement, design strategies and concrete feasible proposals (AU)

Role of Dielectric Screening in Calculating Excited States of Solvated Azobenzene: A Benchmark Study Comparing Quantum Embedding and Polarizable Continuum Model for Representing the Solvent.

The low energy excited states of the conformational isomers of solvated azobenzene are calculated with several DFT methods accounting for the solute-solvent interaction implicitly with the polarizable continuum model or explicitly with subsystem DFT. For the latter, embedding potentials are calculated for 21 sampled snapshots of the solvent molecules. First, we find that accounting for the solvent implicitly or explicitly has little effect on the predicted cis-trans S1 excitation energy gap. Second, we find that azobenzene's S1 cis and trans energies are accurate as long as a screened range-separated hybrid exchange-correlation functional is employed. Finally, we also tested a simplified workflow whereby a single, averaged, embedding potential is used. Unfortunately, we find larger deviations against the experiment for the simplified workflow. This highlights a basic flaw in the approach, where the time scale of solvent averaging is much longer than that of the solute's electronic polarization.

Composite waste recycling: Predictive simulation of the pyrolysis vapours and gases upgrading process in Aspen plus.

Waste generation is one of the greatest problems of present times, and the recycling of carbon fibre reinforced composites one big challenge to face. Currently, no resin valorisation is done in thermal fibre recycling methods. However, when pyrolysis is used, additional valuable compounds (syngas or H2-rich gas) could be obtained by upgrading the generated vapours and gases. This work presents the thermodynamic and kinetic multi-reaction modelling of the pyrolysis vapours and gases upgrading process in Aspen Plus software. These models forecast the theoretical and in-between scenario of a thermal upgrading process of an experimentally characterised vapours and gases stream (a blend of thirty-five compounds). Indeed, the influence of temperature (500 °C-1200 °C) and pressure (ΔP = 0, 1 and 2 bar) operating parameters are analysed in the outlet composition, residence time and possible reaction mechanisms occurring. Validation of the kinetic model has been done comparing predicted outlet composition with experimental data (at 700 °C and 900 °C with ΔP = 0 bar) for H2 (g), CO (g), CO2 (g), CH4 (g), H2O (v) and C (s). Kinetic and experimental results show the same tendency with temperature, validating the model for further research. Good kinetic fit is obtained for H2 (g) (absolute error: 0.5 wt% at constant temperature and 0.3 wt% at variable temperature) and H2O (v) shows the highest error at variable T (8.8 wt%). Both simulation and experimental results evolve towards simpler, less toxic and higher generation of hydrogen-rich gas with increasing operating temperature and pressure.

Current use of biologic therapies for musculoskeletal disease: A survey of board-certified equine specialists.

OBJECTIVE: To evaluate the use of mesenchymal stem cells (MSCs), autologous conditioned serum (ACS), platelet-rich plasma (PRP), and autologous protein solution (APS) for the treatment of equine musculoskeletal disease by diplomates of the American College of Veterinary Surgery (ACVS), and American College of Veterinary Sports Medicine and Rehabilitation (ACVSMR). STUDY DESIGN: Cross-sectional study. SAMPLE POPULATION: Diplomates (n = 423). METHODS: An email link was sent to ACVS and ACVMR diplomates. A survey contained 59 questions regarding demographics, as well as indications, frequency, adverse effects, and limitations of use. Responses were analyzed using Fisher's exact test. RESULTS: One hundred and fifty four surveys were analyzed. Years in practice and type of practice were not associated with biologic therapy use. PRP was the most used therapy (120/137; 87.5%). PRP and MSCs were most often administered intralesionally while ACS and APS were most often administered intra-articularly. ACS (50/104; 48.1%) treatment was repeated commonly within 2 weeks of initial injection. MSCs (39/90; 43.3%) and PRP (38/100; 38%) were commonly repeated 1-2 months after initial injection and APS was typically repeated >4 months after initial injection (21/53; 39.6%). Local inflammation and expense were the most common adverse effect and limitation of use. CONCLUSION: Diplomates most commonly utilized PRP and MSC intralesionally for soft-tissue injuries, and ACS and ACP intra-articularly for joint injury. Protocols for repeated administration varied widely. Local inflammation was a clinical concern with the use of biologics. CLINICAL SIGNIFICANCE: Biologic therapies are used commonly by ACVS and ACVSMR diplomates for soft tissue and joint disease.

Effect of Dentoxol® in the treatment of recurrent mild aphthous ulcers. A prospective observational pilot study

ABSTRACT: Background: Recurrent aphthous stomatitis (RAS) is the most common oral ulceration. Its prevalence in the general population varies between 5% and 60%, and during the acute period, it causes pain and interferes with basic activities, such as eating, swallowing and talking. Dentoxol® is a medical mouthrinse that cleans, moisturizes and lubricates the mouth, mechanically stimulating local epithelial regeneration. The aim of this study was to evaluate the efficacy of Dentoxol® in improving the general state of patient with minor RAS using two different treatment schemes. Material and methods: Thirty-nine patients with RAS were recruited in a prospective observational pilot study. Two dosing regimens, 5 ml of Dentoxol® twice daily and 5 ml of Dentoxol® three times daily were evaluated. Results: Efficacy to improve the general state was significant superior in "Three time daily" group compared with "twice daily" at 72 h (66% vs 33% respectively). No pain was reported in approximately 90% of cases at 96 h of use in both group without significant differences between the groups in any evaluation time-point. Conclusion: Despite the limitations of these preliminary data, Dentoxol® shows promising beneficial properties for the management of minor RAS.